Needles & Cartridges

3RL vs 5RL vs 7RL vs 9RL: Which Round Liner Size to Use

Kwadron Cartridge Needles - Round Liner (RL) Tattoo Cartridges 20pcs

Short answer

What size round liner should I use?

Choose a round liner by the line weight you want and the size of the piece. 1RL and 3RL draw fine lines and small script, 5RL and 7RL are the everyday outline sizes, 9RL and 11RL give bold outlines, and 14RL is for heavy traditional lines. Diameter changes the result too: a #12 (0.35 mm) liner draws a heavier line than a #10 (0.30 mm) at the same count.

Key takeaways

  1. The number before RL is the needle count; more needles make a wider, heavier line in one pass.
  2. 3RL is the standard fine-line and small-script liner; 7RL is the common all-purpose outline size.
  3. 9RL and up are for bold outlines; 14RL and 18RL make the thick lines of large traditional work.
  4. Diameter matters as much as count: #10 (0.30 mm) gives a finer, softer line than #12 (0.35 mm) at the same count.
  5. Size the liner to the piece: the same line weight that looks right on a back piece looks heavy on a wrist.
On this page 9 sections

The round liner is the needle every artist buys first and keeps buying, and the size question comes up on almost every order: 3, 5, 7 or 9. The answer is set by two numbers on the box, needle count and diameter, and by how big the tattoo is. This page compares every common round liner size and says which one to reach for. It is published by Miami Tattoo Supplies (MTS); the cartridges named are in the needle cartridge collection at Miami Tattoo Supplies.

What do the round liner sizes mean?

The number before RL is the needle count. A 7RL is seven needles soldered into a tight circle that converges to a point. More needles make a wider circle, so a bigger RL draws a wider line in one pass and carries more ink. In a full code such as 1207RL, the first two digits are the diameter of each needle: 12 means 0.35 mm, 10 means 0.30 mm, 08 means 0.25 mm. The needle codes guide covers the format.

Round liners are tight; round shaders (RS) use the same circle spaced more loosely for soft fills. If you are unsure which family you need, start with round liner vs round shader.

Which round liner size is used for what?

These are common uses, not rules. Your hand speed, stroke and the size of the piece shift them.

Size Line weight Typical uses
1RL Finest Single-needle fine line, micro detail, tiny script
3RL Fine Fine line, small script, detail inside larger work
5RL Light to medium Small-piece outlines, medium script, fine detail
7RL Medium Everyday outlines on medium pieces, block letters
8RL and 9RL Bold Bold outlines, traditional work, larger lettering
11RL Very bold Heavy outlines on large pieces
14RL and 18RL Extra bold Thick traditional lines in one pass, large-scale work

Bishop's own description of its Liner Power Wand lists 3RL shading among its jobs. Small liners are also used to add texture or soft dot shading, not only lines.

3RL vs 5RL: which is better for fine work?

Use the 3RL when the line must stay thin and the piece is small; use the 5RL when the line needs to read from a distance or the piece is a little larger. A 3RL in #10 (0.30 mm) is the everyday fine-line liner. A 5RL holds a line more solidly and heals with a little more weight, which helps small text that might otherwise soften. Fine line needles have their own guide: best needles for fine line tattoos.

7RL vs 9RL: which should you use for outlines?

The 7RL is the safe default for outlines on medium pieces such as a forearm or calf design. Move up to the 9RL when the design is bold or large, when you want a traditional look, or when lines must survive years of softening. Going too big on a small piece is the common mistake: heavy lines close up small gaps as the tattoo ages.

When do you need 11RL, 14RL or larger?

When one pass must lay down a thick, solid line. Large traditional pieces, big lettering outlines and bold blackwork borders are the usual jobs. A bigger liner also means fewer passes for the same weight, which is gentler on skin than tracing a line two or three times with a smaller needle. These sizes are less common, and not every brand makes every one.

How does needle diameter change the line?

At the same count, a thinner needle draws a finer line and releases ink more slowly. A 7RL in #10 (0.30 mm) gives a lighter, crisper line than a 7RL in #12 (0.35 mm). Kwadron makes its 0.30 mm round liner in twelve counts, from 3RL to 18RL, and puts the count rule plainly: fewer needles give a thinner line, higher counts give thicker, more old-school lines. For most outlines, #12 is the standard; for fine line and delicate detail, #10 or #08 (0.25 mm). The diameter and taper guide explains why.

Diameter Code Best for
0.35 mm #12 Standard outlines, bold lines, traditional
0.30 mm #10 Fine lining, script, black and grey detail
0.25 mm #08 Fine line and micro detail
0.18 to 0.22 mm #04 to #06 Very fine single-needle and micro work

Which round liner sizes does Miami Tattoo Supplies carry?

At the time of writing (November 2026), the round liner listings at MTS offer:

  • Kwadron round liners (RL): 1RL to 18RL across #12, #10 and #08, long taper, with medium-taper options in #12; $31.49 to $39.99 per box of 20.
  • Emalla round liners: 1RL to 14RL, #12 down to #4 (0.18 mm) in some sizes; $25.99 to $32.99 per box of 20.
  • Bishop Da Vinci V2 round liners: 3RL to 14RL, #12 down to #4 in the 3RL; $32.49 to $39.99 per box.
  • Elite Infini Plus round liners: 1RL to 14RL in #12, with #10 and #08 in the smaller sizes; $25.99 to $29.99 per box.

Stock varies by size and diameter, so check the option you want on the product page, such as the Kwadron round liner cartridges. A practical starter set is a 3RL, a 7RL and a 9RL in #12, plus a 3RL in #10 for fine work.

The bottom line

Pick the count for line weight, the diameter for crispness, and size both to the piece. Most outline work lives between 3RL and 9RL; bigger liners are for bold, large work, and 1RL for the finest detail.

Gear mentioned

Products from the Miami Tattoo Supplies catalog, the publisher of this site. Check current price and stock on the store.

Frequently asked questions

What size round liner is best for beginners?

A 3RL and a 7RL in #12 (0.35 mm) cover most practice work: the 3RL for fine detail and small script, the 7RL for outlines. Practice both on synthetic skin, because the larger liner needs a slower, steadier hand to keep the line solid. Add a 9RL once bold outlines come up.

What is the difference between 3RL and 5RL?

Both are small round liners. A 3RL has three needles and draws a fine line suited to small script and detail; a 5RL has five and draws a slightly heavier line that holds up better in small text and outlines on small pieces. In the same diameter, the 5RL also carries more ink per pass.

Is a 7RL or 9RL better for traditional tattoos?

Bold traditional work usually calls for a 9RL or larger, often 11RL or 14RL on bigger pieces, because heavy outlines are part of the style and age well. A 7RL suits traditional designs on smaller areas such as a wrist or ankle, where very thick lines would crowd the design.

Does a bigger round liner hurt more?

A bigger grouping spreads the impact over more needles and lays the line in fewer passes, so it is not automatically more painful. Pain depends more on placement, depth, voltage and how many times the same skin is worked. Overworking an area with a small liner can do more harm than one clean pass with a larger one.

What does RLLT mean on a cartridge?

RLLT means round liner, long taper. Kwadron writes its codes this way, for example 30/7RLLT, which is seven 0.30 mm needles in a round liner with a long taper. Long taper is the default on most cartridges sold today, and it gives a fine point suited to clean line work.

Sources

  1. Kwadron — Cartridge System 0.30 mm RL product page
  2. Bishop Tattoo Supply — Power Wand with Advanced Battery (version uses)