Tattoo Needle Sizes and Codes Explained, With Chart (1203RL, 1009M1)

Short answer
What do tattoo needle codes mean?
A tattoo needle code reads diameter, then needle count, then grouping, then taper. In 1207RL, 12 means #12 needles (0.35 mm), 07 means seven needles, and RL means round liner. Diameter codes are 08 = 0.25 mm, 10 = 0.30 mm, 12 = 0.35 mm. Common groupings are RL, RS, M1 (weaved magnum), M2 (stacked magnum), RM or CM (curved magnum) and F (flat).
Key takeaways
- The first two digits are the needle diameter: 08 = 0.25 mm, 10 = 0.30 mm, 12 = 0.35 mm, 14 = 0.40 mm on most current charts.
- The next two digits are the number of needle points, so 1009 is nine needles of 0.30 mm.
- The letters give the grouping: RL round liner, RS round shader, M1 or MG magnum, M2 stacked magnum, RM, CM or SEM curved soft-edge magnum, F flat.
- A trailing LT, MT or SLT is the taper; T or TX means textured needles for better ink hold.
- Brands print the same information in different orders, such as Kwadron 30/7RLLT and Cheyenne 7 liner 0.30 slt, so decode the parts rather than the layout.
On this page 9 sections
Every box of needles or cartridges carries a short code, and once you can read it you can order any brand without opening a sample. This page is the reference: what each part of the code means, the full diameter and grouping tables, and how the major cartridge makers print the same information in different layouts. It is published by Miami Tattoo Supplies (MTS), whose needle cartridge collection lists every option in this format.
How do you read a tattoo needle code?
Read it left to right as diameter, count, grouping, then taper. The classic format is four digits followed by letters:
- 1203RL = #12 diameter (0.35 mm), 3 needles, round liner.
- 1207RL = #12 (0.35 mm), 7 needles, round liner.
- 1009M1 = #10 (0.30 mm), 9 needles, weaved magnum.
- 0803RL = #08 (0.25 mm), 3 needles, round liner.
- 1215RM = #12 (0.35 mm), 15 needles, curved (round) magnum.
The leading zero matters only for alignment: 03 and 3 mean the same thing. Some brands add a taper or texture suffix at the end, such as 1003RLL from Emalla, where the final L stands for long taper.
What do the diameter numbers mean?
The first two digits are the thickness of each individual needle. Smaller numbers are thinner needles that hold and release less ink per pass; thinner needles below #12 are usually called bugpins.
| Code | Diameter | Common name | Typical use |
|---|---|---|---|
| #04 | 0.17–0.18 mm | Super bugpin | Micro and single-needle detail |
| #06 | 0.20–0.22 mm | Super bugpin | Very fine line work |
| #08 | 0.25 mm | Fine bugpin | Fine line, delicate shading, portrait detail |
| #10 | 0.30 mm | Bugpin | Fine lining, smooth black and grey |
| #12 | 0.35 mm | Standard | General lining, shading, color packing |
| #14 | 0.40 mm | Large | Bold lines and heavy fill |
The middle rows are consistent across every brand checked for this page. The edges are not. Bishop lists #4 as 0.17 mm and #6 as 0.22 mm on its Da Vinci V2 page, while Emalla lists #4 as 0.18 mm and #6 as 0.20 mm. Cheyenne skips the number and prints the millimetres directly (0.18, 0.20, 0.25, 0.30, 0.35, 0.40). When it matters, go by the millimetre figure, not the number. For how diameter changes ink flow and texture, see needle diameter and taper explained.
What does the needle count mean?
The second pair of digits is the number of needle points soldered into the group. In round groupings, more needles make a wider line or a wider shading stroke. In magnums, the count sets the width of the blade.
Count and diameter work together. Kwadron points out on its own product pages that 0.35 mm needles are not only thicker than 0.30 mm ones but also spaced further apart, so a 0.35/15 magnum covers a wider path than a 0.30/15 magnum with the same number of needles. If you switch diameters, expect the same count to behave differently.
What do the grouping letters mean?
The letters describe how the needles are arranged. This is where brands differ most in spelling, so the table lists the common variants.
| Letters | Grouping | Arrangement | Main job |
|---|---|---|---|
| RL | Round liner | Tight circle, sharp point | Outlines and line work |
| RS | Round shader | Looser circle | Small shading, fills, bold lines |
| M1, M, MG, MS | Magnum (weaved) | Two rows, alternating | Shading and color packing |
| M2 | Stacked magnum | Two rows, packed tighter | Denser packing |
| RM, CM, SEM, SE, M1C | Curved / soft-edge magnum | Magnum with a curved edge | Soft shading, blending, packing |
| F | Flat | Single straight row | Geometric fills, sharp-edged shading |
| TRL | Turbo round liner (Kwadron) | Round liner variant | Line work |
| OL | Open liner (Cheyenne) | Liner set slightly open | Bolder lines that still flow |
Round liners and shaders are compared in detail in round liner vs round shader, liner sizes in 3RL vs 5RL vs 7RL vs 9RL, and the magnum family has its own page: magnum needles explained.
What do LT, MT, SLT and T mean at the end of a code?
The suffix is the taper, the length of the ground point on each needle. LT is long taper, MT medium taper, and SLT super long taper; Cheyenne uses SLT for its liners and LT for its shaders and magnums, and also sells MT liners and shaders. A longer taper gives a finer point; a shorter taper puts more steel into the skin per hit and is often chosen for packing.
There is no industry-wide millimetre standard for taper names, and many makers publish no lengths at all. Emalla is one that does: on its Eliot cartridges, medium taper is 3.5 mm, long taper 5.5 mm and extra long 7 mm. Treat those as Emalla's figures, not a standard, and compare tapers within a single brand.
A T or TX suffix means textured needles, which have a roughened surface intended to hold more ink. Kwadron sells textured round liners as RL-T; Cheyenne marks textured cartridges with TX.
How do the big cartridge brands write their codes?
Same information, different layouts. These are taken from the makers' own pages and the Miami Tattoo Supplies (MTS) product listings.
| Brand | Example | Reads as |
|---|---|---|
| Classic format | 1207RL | #12, 7 needles, round liner |
| Kwadron | 30/7RLLT | 0.30 mm, 7 needles, round liner, long taper |
| Cheyenne | 7 liner 0.30 slt | 7 needles, liner, 0.30 mm, super long taper |
| Emalla | 1209CML | #12, 9 needles, curved magnum, long taper |
| Bishop Da Vinci V2 | 07RL, Bugpin (10) | 7 needles, round liner, #10 |
Two more Emalla codes show the system handles big groupings too: its Super Curved Mag comes as 1235 CM (35 needles of 0.35 mm) and 1049 CM (49 needles of 0.30 mm). On the MTS listings, Cheyenne soft-edge magnums appear as SE, as in 17-SE.
On the MTS site, cartridge options are listed as count and grouping, then diameter, then taper, for example "7RL / #10 (0.30mm) / Long Taper" on the Kwadron round liner cartridges. The codes do not tell you whether a cartridge fits your machine; that is covered in are tattoo cartridges universal.
Worked examples
- 0801RL: one 0.25 mm needle. A single-needle fine-line setup.
- 1003RL: three 0.30 mm needles in a tight round. A common fine-line and script liner.
- 1209RS: nine 0.35 mm needles in a loose round. Small shading areas and bold fills.
- 1013RM: thirteen 0.30 mm needles in a curved magnum. Smooth black and grey shading.
- 35/7RLMT (Kwadron style): seven 0.35 mm needles, round liner, medium taper.
The bottom line
Decode the four parts and every box becomes readable: diameter, count, grouping, taper. Buy by millimetre when brands disagree on the number, and compare tapers inside one brand. The full cartridge range, with these options listed per product, is in the needle cartridges collection at Miami Tattoo Supplies, the store that publishes this site.
Watch
Gear mentioned
Products from the Miami Tattoo Supplies catalog, the publisher of this site. Check current price and stock on the store.

Kwadron
Kwadron Cartridge Needles - Round Liner (RL) Tattoo Cartridges 20pcs
View at Miami Tattoo Supplies: Kwadron Cartridge Needles - Round Liner (RL) Tattoo Cartridges 20pcs
Emalla
Emalla Tattoo Needle Cartridges - Round Liners (20pcs)
View at Miami Tattoo Supplies: Emalla Tattoo Needle Cartridges - Round Liners (20pcs)
Bishop
Bishop Da Vinci V2 Tattoo Cartridge Needles 20pcs - Round Liners
View at Miami Tattoo Supplies: Bishop Da Vinci V2 Tattoo Cartridge Needles 20pcs - Round Liners
Kwadron
Kwadron Cartridge Needles - Soft Edge Curved Mag (SEM) Tattoo Cartridges 20pcs
View at Miami Tattoo Supplies: Kwadron Cartridge Needles - Soft Edge Curved Mag (SEM) Tattoo Cartridges 20pcs
Elite
ELITE INFINI PLUS Tattoo Needle Cartridges - Curved Magnum (20pcs)
View at Miami Tattoo Supplies: ELITE INFINI PLUS Tattoo Needle Cartridges - Curved Magnum (20pcs)
Frequently asked questions
What does 1203RL mean on a tattoo needle?
1203RL is a #12 diameter needle (0.35 mm) with three needle points in a round liner grouping. It is one of the most common liners for small and medium line work. The same configuration may be written 35/3RLLT by Kwadron or 3 liner 0.35 slt by Cheyenne, which add the taper to the end.
What is the difference between #10 and #12 tattoo needles?
A #10 needle is 0.30 mm thick and a #12 needle is 0.35 mm. #10 needles, often called bugpins, carry less ink per pass and suit finer lines and smoother black and grey. #12 is the standard size for general lining, shading and packing, and its groupings are slightly wider at the same needle count.
What does M1 mean in a needle code?
M1 is a weaved magnum: two rows of needles set in an alternating pattern, used for shading and color packing. M2 is a stacked magnum, with the rows packed tighter. Curved versions are labeled M1C, RM, CM or SEM depending on the brand. Most cartridge makers simply write M or MG for their standard magnum.
What does LT mean on tattoo cartridges?
LT means long taper, the length of the ground point on each needle. Long tapers give a finer point and are the default on most cartridges sold today. MT is medium taper and SLT super long taper. Because taper lengths are not standardized across brands, compare them within one maker's range.
Is a 0801RL the same as a single needle?
Yes. 0801RL is a single 0.25 mm needle in a liner grouping, which is what artists mean by a single needle or 1RL. Single needles are used for very fine line work and micro detail. They demand a steady hand and are covered in more depth in the fine line needle guide.