Needles & Cartridges

Needle Diameter and Taper: Bugpins, #10, #12 and Long Taper

Bishop Da Vinci V2 Tattoo Cartridge Needles 20pcs - Round Liners

Short answer

What is a bugpin tattoo needle?

A bugpin is a tattoo needle thinner than the standard #12 (0.35 mm). #10 (0.30 mm) is the usual bugpin, and #08 (0.25 mm) and smaller are sold as fine or super bugpins. Thinner needles deposit less ink per pass, giving finer lines and softer shading, but need more passes. Taper, the length of each needle's ground point, is a separate choice; long taper is the default.

Key takeaways

  1. Standard tattoo needles are #12 (0.35 mm); #10 (0.30 mm) is a bugpin, and #08 (0.25 mm) and below are fine or super bugpins.
  2. Thinner needles hold and release less ink per pass, so they suit fine lines, soft gradients and black and grey, at the cost of speed.
  3. Thicker needles are also spaced further apart, so the same count in #12 covers a wider path than in #10.
  4. Taper is the length of the needle's point: longer tapers give a finer point, shorter tapers put more steel into the skin per hit.
  5. Taper names (MT, LT, SLT) are not standardized in millimetres, so compare tapers within one brand.
On this page 6 sections

Two cartridges can share the same grouping and count and still tattoo very differently, because the needles inside are a different thickness or ground to a different point. Those two numbers, diameter and taper, are what this page covers, starting with the term that confuses most newcomers: bugpin. It is published by Miami Tattoo Supplies (MTS), which lists the diameter and taper of every option in its needle cartridge collection.

What is a bugpin tattoo needle?

A bugpin is any tattoo needle thinner than the standard #12 (0.35 mm). The everyday bugpin is #10 (0.30 mm). Thinner still, #08 (0.25 mm), #06 and #04 are sold as fine or super bugpins.

Brands label the tiers slightly differently. Bishop calls #10 "Bugpin" and #08, #06 and #04 "Super Bugpin". Kwadron's listings at Miami Tattoo Supplies (MTS) call #10 a bugpin and #08 a fine bugpin. Salvation sells two sizes only, "Standard" #12 and "Bugpin" #10.

Code Diameter Usual label What it does
#14 0.40 mm Large Maximum ink flow for bold lines and heavy fill
#12 0.35 mm Standard General lining, shading and packing
#10 0.30 mm Bugpin Finer lines, smoother black and grey
#08 0.25 mm Fine / super bugpin Fine line, delicate detail, soft gradients
#06 0.20–0.22 mm Super bugpin Very fine line work
#04 0.17–0.18 mm Super bugpin Micro detail

The smallest sizes are where brands disagree on the millimetre figure: Bishop lists #6 as 0.22 mm and #4 as 0.17 mm, while Emalla lists 0.20 mm and 0.18 mm. Buy by the millimetre value when it matters. The complete code system is in the needle code decoder.

How does needle diameter change the tattoo?

Thinner needles carry and release less ink each time they enter the skin. That produces a finer line, lighter and smoother shading, and softer transitions, and it means more passes to reach the same saturation. Thicker needles put more ink in per pass, which is faster for bold lines, solid black and color packing.

Kwadron's own guidance is specific about the trade-off. It says #10 needles give smoother color application, gentler shading and smoother transitions between black and grey, and that #08 suits fine details such as portrait work but slows you down. It also points out something easy to miss: #12 needles are not only thicker, they are spaced further apart within the grouping. A 15-needle #12 magnum is therefore wider than a 15-needle #10 magnum, even though the count is the same.

In practice:

  • #12 for everyday lining, bold traditional work, solid black and color packing.
  • #10 for fine lining, realism, black and grey, and smooth gradients. See the grey wash guide for the ink side.
  • #08 and below for fine line, micro detail and soft portrait work. See the best needles for fine line tattoos.

What is needle taper?

Taper is the length of the ground point at the tip of each needle, measured from where the needle starts to narrow to the tip. A long taper narrows gradually to a fine point; a short taper narrows quickly to a blunter point.

The usual reasoning in the trade: a longer taper gives a finer, more precise point that enters the skin with less resistance, which suits lining and soft shading. A shorter taper puts more steel into the skin at the same depth, which some artists prefer for bold lines and packing.

Code Name Where you see it
S / ST Standard (short) taper Older needle charts
MT Medium taper Kwadron, Cheyenne and Emalla options
LT Long taper The default on most cartridges
SLT Super long taper Cheyenne liners

Which taper should you choose?

Start with long taper; it is the default on almost every cartridge MTS sells, and every Emalla, Elite and Bishop configuration the store lists is long taper. Try a medium taper if you want a bolder line or faster packing from the same grouping: at MTS, Kwadron offers MT round liners and soft-edge magnums, and Cheyenne sells MT liners and shaders on its own shop.

Do not compare taper names across brands. Most makers publish no taper length at all, and those that do are not working to a shared standard. Emalla, for example, gives its Eliot tapers as 3.5 mm (medium), 5.5 mm (long) and 7 mm (extra long). A Cheyenne LT and a Kwadron LT are not guaranteed to be the same length.

Prices at the time of writing

Bugpins cost the same as standard needles in most ranges. At MTS at the time of writing (November 2026), Bishop Da Vinci V2 round liners in every diameter from #12 to #04 are $32.49 to $39.99 per 20-box, Emalla round liners from #12 to #04 are $25.99 to $32.99, and Salvation curved magnums in #12 or #10 are $16 to $32 depending on size and box. See the Bishop Da Vinci V2 round liners for the widest diameter range on one page, or the full needle cartridges collection. Shading needle choices are in the best needles for shading and color packing and magnum needles explained.

Gear mentioned

Products from the Miami Tattoo Supplies catalog, the publisher of this site. Check current price and stock on the store.

Frequently asked questions

What is the difference between a bugpin and a regular needle?

A regular tattoo needle is #12, or 0.35 mm thick. A bugpin is thinner, usually #10 (0.30 mm), with #08 (0.25 mm) and smaller sold as fine or super bugpins. Bugpins release less ink per pass, which suits finer lines and smoother shading but makes solid fills slower.

Are bugpin needles good for beginners?

Not usually as a first choice. Thinner needles show inconsistent hand speed and depth more clearly, and they need more passes for saturation. Most apprentices learn on standard #12 groupings on practice skin under a mentor, then add #10 bugpins for fine lining and black and grey as control improves.

What does long taper mean on a cartridge?

Long taper means each needle is ground to a gradual, fine point. It is the default on most modern cartridges and suits lining and smooth shading. Medium and short tapers end in a blunter point. Taper lengths are not standardized, so a long taper from one brand may not match another's.

Is #10 or #12 better for black and grey?

Many black and grey artists favor #10 bugpins for smooth, soft gradients, because each pass deposits less ink. #12 is faster for darker tones and solid black. Kwadron describes #10 as giving gentler shading and smoother transitions between black and grey. Plenty of artists use both in the same piece.

What size is a #8 tattoo needle?

A #8 needle, also written 08, is 0.25 mm in diameter. It is sold as a fine or super bugpin and is used for fine line, small script and delicate detail. A code such as 0803RL means three 0.25 mm needles in a round liner grouping.

Sources

  1. Bishop Tattoo Supply — Da Vinci V2 Liners (gauge and bugpin sizes)
  2. Kwadron — Cartridge System 0.30 mm SEM (diameter and spacing guidance)
  3. Cheyenne — Safety Cartridges (diameters and tapers)
  4. Emalla — Eliot cartridge needles (published taper lengths)