Convention and Guest Spot Checklist: What Tattoo Supplies to Pack

Short answer
What supplies should I bring to a tattoo convention or guest spot?
Pack a complete single-use setup: your machine with charged spare batteries or power supply, pre-sterilized cartridges with expiry dates on the packs, gloves, ink caps, barrier covers, an EPA-registered tuberculocidal disinfectant, sharps container, stencil supplies, inks, aftercare handouts and your license or guest registration. In Florida, apply for guest registration at least 14 days before you tattoo.
Key takeaways
- Bring everything single-use and pre-sterilized; Florida's convention checklist asks artists to show each item's expiry date and sterilization method.
- Out-of-state artists in Florida need a $35 guest registration, valid up to 14 consecutive days, filed at least 14 days ahead under Rule 64E-28.004.
- Promoters apply for the temporary establishment license and biomedical waste permit at least 30 days before the event.
- At a convention you supply your own lighting of at least 100 foot-candles at the work area, per Florida's checklist.
- For a guest spot, ask the host in writing what the shop provides before you pack; never assume.
On this page 6 sections
A convention booth or a guest chair strips away everything your home studio quietly provides: the restocked drawer, the spare battery on the charger, the box of gloves in your size. Whatever you forget, you either buy at inflated prices on the floor or work without. The answer is to pack as if nothing will be provided, then confirm what actually is.
This checklist is published by Miami Tattoo Supplies, a tattoo supply store in Hollywood, Florida. The regulatory points come from the Florida Department of Health's tattooing pages and Chapter 64E-28 as they read in November 2026; other states run their own guest and event rules, so check with the health department where you will work. Cases and travel gear are in the store's studio supplies collection.
What paperwork do you need to tattoo at a Florida convention or guest spot?
An active Florida tattoo artist license, or a guest tattoo artist registration if you are licensed in another jurisdiction, displayed at your work area. The Department's checklist asks every convention artist to display one of the two.
Guest registration, per the Department's page and Rule 64E-28.004:
- Application form DH 4150, naming the licensed tattoo establishment (or licensed temporary establishment) where you will tattoo.
- Age 18 or older, with government-issued photo ID.
- A copy of your active license, registration or certification from outside Florida.
- A bloodborne pathogens and communicable diseases course passed at 70% or more, or a comparable course the Department accepts.
- A $35 fee (the page notes fees may vary by location), filed with the county health department where you will practice.
- Submit at least 14 days before you tattoo. Registration is valid for up to 14 consecutive days.
If your home state does not license tattoo artists, you apply for a full Florida license instead; see how to get a tattoo license in Florida.
What the promoter or host shop must have
The event itself is licensed as a temporary tattoo establishment: a separate license valid for up to 14 consecutive days, with application form DH 4151 and a biomedical waste generator permit filed at least 30 days before the event. The Department's checklist puts these on the promoter, along with hand sinks every artist can reach (portable sinks are allowed only at temporary events), event customer record forms, the notarized consent form for 16- and 17-year-olds, and two years of record keeping.
The booth itself must have rigid perimeter walls, floor and ceiling under Rule 64E-28.008, and the Department inspects before the event opens. For a guest spot, the host shop's own establishment license covers the premises; your job is the guest registration and your own kit.
The convention packing checklist
Machines and power
- Primary machine and a backup.
- Wireless: every battery fully charged, plus the charger and cable. Spare batteries listed in stock included the Mast Tour replacement battery at $75 and the Peak Solice Pro 2 PowerPack at $99.99 at the time of writing.
- Corded: power supply, foot pedal, clip cord and a spare cord.
- Check your airline's rules for carrying lithium batteries before you fly.
Sterile single-use stock
- Cartridges in every grouping you might need, in sealed packs. Florida's checklist asks for pre-sterilized items labeled with an expiry date and the sterilization method (ethylene oxide gas or gamma radiation); if a pack does not state the method, bring the manufacturer's document that does.
- Disposable grips or tubes if your machine uses them.
- If you autoclave your own instruments, the checklist asks for spore test results from an independent lab for the most current quarter and the autoclave date on each package. Going fully single-use for travel avoids that paperwork.
Hygiene and barriers
- Gloves in your size, more than you expect to use.
- Machine covers, pen covers, clip cord sleeves, bottle covers and barrier film; see the barrier protection guide.
- An EPA-registered tuberculocidal surface disinfectant, which the checklist requires, with proof of its EPA registration. Disinfectant wipes travel more easily than sprays; any refilled container must be labeled with its contents.
- Alcohol-based hand sanitizer for the station (recommended by the checklist; it does not replace hand washing).
- A sharps container; a 1 quart container was $8.95 at the time of writing.
- Paper towels, gauze, table paper or drape sheets, and bags for regular waste.
Ink and setup
- Inks in sealed or well-capped bottles, single-use ink caps and a cap holder.
- Stencil paper, stencil solution, skin markers and a stencil printer if you use one.
- Stencil product and post-tattoo ointment in single-dose packs or dispensed as a single customer dose, which Rule 64E-28.009 requires.
Station and comfort
- A light: the checklist requires at least 100 foot-candles at the work area, and it is the artist's item on the list.
- A tray stand or portable work station, and an arm rest if the booth does not include one.
- Extension cord and power strip.
Paperwork and client care
- License or guest registration to display.
- Written aftercare instructions; Florida requires aftercare to be given both verbally and in writing.
- Copies of customer records to hand to the promoter, as the checklist asks.
Our station setup guide shows how this kit goes together on the table.
Cases that survive travel
At the time of writing, Miami Tattoo Supplies listed an aluminum convention carrying case with locks at $29.99, a larger aluminum travel case at $129 to $179, the Blaq Paq foam case by Sullen at $19.90 for machines, and the Blaq Paq Rhino by Sullen at $160. A tripod work station was $99 and a portable, height-adjustable tattoo table $195 to $239 for artists who bring their own furniture. Wireless artists can compare battery systems in the wireless tattoo machines guide.
What a host shop may or may not supply
It varies, so ask in writing before you travel: whether the shop provides gloves in your size, barriers, disinfectant, paper goods, sharps disposal, stencil printing, furniture and lighting, and whether it expects you to bring cartridges and ink. Bring your own machine, power, cartridges and inks regardless; those are the items you cannot substitute on the day.
Watch
Gear mentioned
Products from the Miami Tattoo Supplies catalog, the publisher of this site. Check current price and stock on the store.

Travel Case Small or Large Capacity 3 or 4 in 1
View at Miami Tattoo Supplies: Travel Case Small or Large Capacity 3 or 4 in 1
Tattoo Equipment Case Aluminum Travel and Convention Carrying Supply Bag With Locks
View at Miami Tattoo Supplies: Tattoo Equipment Case Aluminum Travel and Convention Carrying Supply Bag With Locks
Mast
Mast Wireless Tattoo Battery Remplacement Power Supply
View at Miami Tattoo Supplies: Mast Wireless Tattoo Battery Remplacement Power Supply
CaviCide Surface Disinfectant Wipes 160 Count
View at Miami Tattoo Supplies: CaviCide Surface Disinfectant Wipes 160 Count
Dynarex
Sharps Bio Hazard Tattoo Container 1 Quart.
View at Miami Tattoo Supplies: Sharps Bio Hazard Tattoo Container 1 Quart.
Adjustable Tattoo Work Station (Stable Tripod Stand)
View at Miami Tattoo Supplies: Adjustable Tattoo Work Station (Stable Tripod Stand)
Frequently asked questions
How far in advance do I need to register as a guest tattoo artist in Florida?
Rule 64E-28.004 says to submit the guest tattoo artist application at least 14 days before you tattoo at a licensed establishment or licensed temporary establishment. Registration costs $35 and is valid for up to 14 consecutive days. Apply to the county health department where you will work and confirm the timing there.
Can I tattoo at a Florida convention with an out-of-state license?
Yes, with a Florida guest tattoo artist registration. You need an active license, registration or certification from another jurisdiction, photo ID showing you are 18 or older, and a qualifying bloodborne pathogens course passed at 70%. If your state does not license tattoo artists, you need a full Florida license instead.
Do I need an autoclave at a tattoo convention?
Not if you bring only pre-sterilized, single-use items. Florida's convention checklist asks for each item's expiry date and sterilization method. If you sterilize your own instruments before the event, you must show the most recent quarter's spore test results from an independent laboratory and date-label every package.
What lighting do I need for a convention booth?
Florida's convention checklist requires at least 100 foot-candles of light at each artist's work area. Bring your own task light rather than relying on hall lighting, and set it up before the inspection. A ring light or arm light that clamps or stands at the station is the usual answer.
What should I bring to a guest spot at another shop?
Your machine and power, enough cartridges in every grouping you use, your inks, and your license or guest registration. Confirm in writing what the host shop supplies, such as gloves, barriers, disinfectant, stencil printing and sharps disposal, and pack anything they do not cover.