Permanent Makeup

PMU Machine vs Tattoo Machine: What Is the Difference?

Microbeau E.L.B. Adjustable Stroke PMU Machine

Short answer

Can you use a tattoo machine for permanent makeup?

You can do permanent makeup with a rotary tattoo pen only if it runs a short stroke, around 2.2 to 3.5 mm, and accepts PMU cartridges in fine diameters. PMU machines are built around that range: the Microbeau E.L.B. adjusts from 2.2 to 3.4 mm, while tattoo machines such as the FK Irons Flux Max start at 3.2 mm. Coil machines and long-stroke liners are not suited to PMU.

Key takeaways

  1. Stroke is the main difference: PMU machines sit at about 2.2 to 4 mm, tattoo machines at about 3.2 to 5 mm, with overlap only at the short end.
  2. Cartridge fit matters as much as the machine: universal PMU cartridges fit rotary pens, but many PMU digital devices take their own needles.
  3. An adjustable tattoo pen that reaches 2.0 to 2.5 mm, such as the FK One Adjust, can cover PMU work with PMU cartridges.
  4. Licensing does not change with the machine: in Florida both tattooing and permanent cosmetics need a tattoo artist license.
On this page 7 sections

Tattoo artists moving into brows and lips, and PMU artists eyeing a tattoo pen, ask the same question: is a PMU machine a different tool or just a different label? It is the same basic tool, a rotary motor driving a cartridge, tuned for a different job. Whether one machine can do both depends on three specs you can check before you buy.

The differences that matter, in one table

The spec that separates the two is stroke length. Here are machines from the Miami Tattoo Supplies (MTS) machine range, with stroke figures from the makers and product pages.

Machine Built for Stroke Notes
Microbeau E.L.B. PMU 2.2–3.4 mm, adjustable Wireless, RCA module included
Typical fixed-stroke PMU pen PMU 2.5 mm A common all-round brow setting
FK Irons FK One Adjust Tattoo 2.0–5.0 mm, 0.5 mm steps Adjust without powering down
Emalla Grand G5 Pro Tattoo 2.4–4.2 mm, seven settings Wireless or RCA
FK Irons Flux Max Tattoo 3.2, 4.0 or 4.5 mm Wireless, PowerBolt II battery
Bishop Power Wand Tattoo Shader 3.5, Packer 4.2, Liner 5.0 mm RCA or battery

PMU machines cluster between 2.2 and 3.5 mm, with 4.0 mm as the long option. Tattoo machines cluster between 3.2 and 5.0 mm. The overlap is the short end of tattoo machines and the long end of PMU machines.

Why PMU machines run shorter strokes

PMU is soft, controlled implantation in small facial areas, so makers set strokes short and let artists choose within a narrow range. The Microbeau E.L.B. product page recommends 2.2–2.8 mm for soft shading and pixel brows, 2.2–2.5 mm for precision liner and 2.8–3.4 mm for lips. Those ranges barely reach the shortest setting on most tattoo machines. A 4.5 or 5.0 mm liner stroke built to drive bold lines into body skin is the opposite of what a powder brow needs. See tattoo machine stroke length explained for how stroke changes needle travel and hit.

PMU machines are also usually built lighter and slimmer than full-size tattoo machines, for long stretches of fine work near the face.

Cartridges: the part that decides compatibility

A machine is only as compatible as the cartridges it accepts. PMU cartridges are made in finer diameters and long tapers: Kwadron Optima PMU in 0.18 to 0.40 mm, Emalla PMU in 0.18 to 0.35 mm, and Tina Davies PIXL with 0.25 to 0.35 mm needles and a 6 mm taper. All three are sold as standard cartridges for rotary pens.

The catch is the reverse direction. The PIXL product page states that the cartridges fit all rotary machines but are not compatible with PMU digital machines or devices, which often use their own needle systems. So:

  • A rotary tattoo pen that takes standard cartridges can usually run PMU cartridges.
  • A PMU digital device with proprietary needles cannot run tattoo cartridges or most universal PMU cartridges.
  • A coil machine with needles on bar is not a practical PMU tool.

Check the cartridge maker's compatibility list before ordering. Our article on whether tattoo cartridges are universal goes into fit and membranes, and PMU cartridges explained covers the PMU groupings.

So can you use a tattoo machine for permanent makeup?

Yes, if the machine reaches a PMU stroke and accepts PMU cartridges; otherwise no. In practice:

  • Adjustable tattoo pens that go down to 2.0–2.5 mm, such as the FK One Adjust (from 2.0 mm) or the Emalla Grand G5 Pro (from 2.4 mm), can cover brows and liner with PMU cartridges, and switch back to tattoo strokes for other work.
  • Fixed 3.2–3.5 mm tattoo pens can do lip blush and some shading, but sit at the top of PMU ranges for brows and liner.
  • Fixed 4.0 mm and longer machines are the wrong tool for PMU.

The reverse is also true: a PMU machine is not a tattoo machine. Its short stroke and fine cartridges are not designed to line or pack body tattoos.

Who should buy which

Buy a dedicated PMU machine if PMU is your main work. You get the right stroke range by default, a light body, and a setup that cannot drift back to tattoo settings mid-session. The FK Irons facts page describes Microbeau (PMU machines) and Perma Blend (PMU pigments) as sister brands. The Microbeau E.L.B. is $299.99 at Miami Tattoo Supplies at the time of writing (November 2026).

Buy an adjustable tattoo pen if you are a tattoo artist adding brows or lip blush a few times a month. One machine that reaches 2.0 to 2.5 mm, with a separate stock of PMU cartridges, avoids a second purchase. The FK One Adjust is $799.99 at the time of writing; read our FK Irons brand guide for the range.

The bottom line

PMU and tattoo machines are the same kind of tool set for different strokes and needles. If a rotary pen reaches about 2.2–3.4 mm and takes PMU cartridges, it can do PMU; a fixed long-stroke liner or a coil cannot. Compare options in the PMU machine collection and PMU cartridges at Miami Tattoo Supplies, then build the rest of the station from the PMU starter list.

Gear mentioned

Products from the Miami Tattoo Supplies catalog, the publisher of this site. Check current price and stock on the store.

Frequently asked questions

What stroke length is best for permanent makeup?

Most PMU work falls between about 2.2 and 3.5 mm. The Microbeau E.L.B. product page suggests 2.2–2.8 mm for soft shading and pixel brows, 2.2–2.5 mm for eyeliner and 2.8–3.4 mm for lips. Fixed-stroke PMU pens are often set at 2.5 mm, a common all-round brow setting.

Can I use regular tattoo cartridges for PMU?

You can physically fit standard tattoo cartridges in a rotary pen, but PMU cartridges are the better choice: they come in finer diameters such as 0.18 to 0.30 mm with long tapers for soft implantation. Brands like Kwadron, Emalla and Tina Davies make PMU-specific lines that fit standard rotary pens.

Is a PMU machine cheaper than a tattoo machine?

Usually. At Miami Tattoo Supplies at the time of writing (November 2026), the Microbeau E.L.B. is $299.99, while tattoo machines in the catalog range from $119 for an entry pen to over $1,000 for an FK Irons Flux Max or Bishop Power Wand set. Price follows build and features more than category.

Can a PMU machine be used for small tattoos?

Some makers market PMU pens for fine work as well as PMU. For general tattooing a PMU machine is underpowered in stroke, and it is not designed for lining or packing body tattoos. Treat it as a PMU tool.

Is microblading done with a PMU machine?

No. Microblading is done by hand with a pen-style tool holding a disposable blade of fine needles, which cuts hair strokes into the skin. Machine work covers powder, ombre and pixel brows, lip blush and liner. Many artists offer both; the microblading supplies guide lists the hand tools.

Sources

  1. FK Irons — Facts (Microbeau and Perma Blend as sister brands)
  2. Florida Department of Health — Microblading, Permanent Cosmetics, and Micro-needling Using Pigments, Dye, or Ink