Permanent Makeup

Microblading Supplies: Blades, Pigments and Tools Explained

3 in 1 Microblading Pen with Flexible Blades

Short answer

What supplies do you need for microblading?

Microblading needs sterile single-use blades on a hand tool, with the shape (U or angled), pin count (roughly 7 to 18) and needle diameter chosen for the brow; PMU brow pigments and a corrector; mapping string, rulers and pencils; practice skin; and gloves, barrier film and a sharps container. In Florida, microblading is legally tattooing and needs a tattoo artist license.

Key takeaways

  1. Pin count sets the blade length: fewer pins for short fine strokes, more pins for longer strokes and fuller brows.
  2. Blade codes such as 12U or 14CF combine pin count and shape; read the maker's chart because letter codes are not standardized.
  3. Microblades are sharps: sterile, single-use, and disposed of in a sharps container after each client.
  4. Mapping tools and brow practice skins cost a few dollars each and are where symmetry and stroke control are learned.
On this page 9 sections

Microblading is done by hand: a row of fine needles fixed in a blade cuts and deposits pigment in hair-like strokes, with no machine. That makes the supply list short but specific. The blade decides what the strokes look like, the pigment decides how they heal, and the mapping tools decide whether the two brows match. This guide explains each, with prices from the Miami Tattoo Supplies (MTS) microblading range, the store that publishes this site, at the time of writing (November 2026).

The microblading supply list at a glance

You need seven things, most of them inexpensive. The blades and pigments are the decisions; the rest is consumables.

Item What to look for MTS price (Nov 2026)
Hand tool and blades Sterile, single-use blades; shape and pin count matched to the brow Hand tool with three heads $8.50; blades in boxes of 50 or 100
Brow pigments PMU brow shades plus a warm modifier $29.99–$39 per 1/2 oz; sets $109–$267
Mapping Pre-inked string, ruler stickers, mapping pencils $3–$16.90
Practice skin 3D brow sheets $2.99 per sheet
Pigment cups Finger ring cups $8.90 per 50
Hygiene Gloves, barrier film, sharps container about $9–$20 each
Aftercare Brow balm for the client $15 per 10 g

How microblading blades are described

Blades are described by three numbers or letters: shape, pin count and needle diameter.

Shape. The two shapes you will meet most are U-shaped and angled (sloped) blades. Tina Davies describes its U-shaped blade as designed to help artists create natural curves with minimal effort. An angled blade sets its pins on a slant instead. Which you reach for depends on the stroke pattern you were trained in, so buy the shapes your course used before experimenting.

Pin count. The number is how many needles sit in the row, which sets how long a stroke one pass makes. Listings at the store run from 7 to 18 pins. Fewer pins make a shorter blade for short, fine hairs; 12 and 14 pins sit in the middle; 18 pins draw the longest strokes. Tina Davies, for example, positions its 14-pin U blade for medium to fuller brows.

Diameter. Pins are fine, often around 0.18 to 0.25 mm. The Tina Davies 14 U blade uses 14 needles of 0.25 mm in surgical-grade 316 stainless steel, EO gas sterilized, sold ten to a box.

Blade codes on product listings combine these, for example 12U (12 pins, U-shape) or 14CF. The letters are not standardized across brands, so read the maker's own chart before you order a new style. The Biomaser blades listed at Miami Tattoo Supplies come in 7CF, 9CF, 12CF, 14CF, 12U, 14U and 18U, in boxes of 50 or 100, gamma-sterilized and individually packed; availability varies, so check the microblading collection before you plan a first order.

The hand tool: reusable handle or disposable all-in-one

Microblades fit either a reusable handle or come as a disposable tool with the blade fixed in. A reusable handle is cheaper per procedure, but it must be cleaned and disinfected between clients according to your local health rules, and only the blade is changed. A fully disposable tool is used once and thrown away, which simplifies hygiene at a higher cost per client.

The 3-in-1 microblading pen at the store ($8.50 at the time of writing) is a reusable handle with three heads: a cross head for row blades, a round head for single needles, and a 5 mm screw head for shading (fog) needles. Whichever you use, the blade itself is single-use.

Pigments for microblading

Use PMU brow pigments, chosen for the client's skin tone, and have a warm modifier on hand so healed strokes do not turn grey. Perma Blend's Evenflo brow set ($185 for five 1/2 oz bottles), the Tina Davies Sunset brow set ($109) and the Luxe Ready Set Go set ($210) are complete brow palettes from Perma Blend. Single bottles cost $29.99 to $39 at the time of writing. Alice lists its brow shades by base color and says they can be used with any micropigmentation technique.

Perma Blend gives a shelf life of three years unopened and 12 months after opening, and asks for cool, dry storage away from sunlight. For a brand-by-brand comparison and an explanation of organic and inorganic pigments, see the best PMU pigment brands.

Mapping, measuring and practice

Mapping decides symmetry, and good mapping tools cost little. A pre-inked mapping string ($3 Saferly, or $9.50 for a 1 mm bamboo-charcoal string), ruler stickers ($7.99 per roll of 50), mapping pencils ($16.90 for ten) and a brow measuring ruler ($3.60) cover the job. Eyebrow razors are $4 for three.

Train on synthetic skin first. Saferly 3D eyebrow practice sheets, with four pairs of differently shaped brows on each 24 x 15 cm silicone sheet, are $2.99 each and reusable. Our guide to tattoo practice skin covers the flat sheets used for stroke drills.

Hygiene: blades are sharps

Treat every microblade as a contaminated sharp after use. The FDA notes that unsterile equipment and needles can transmit HIV, hepatitis and skin infections. Open a sterile blade in front of the client, use it on one client only, and drop it straight into a sharps container ($8.95 for a quart at the time of writing). Gloves ($10.95–$14.99 per 100), barrier film ($19.90 per roll) and a surface disinfectant complete the list. Our sharps disposal guide covers containers and pickup.

Microblading or a PMU machine?

Microblading gives crisp hair strokes by hand with very little equipment. Machine techniques such as powder or ombre brows use a PMU pen instead; many artists offer both. If you are adding a machine, read PMU machine vs tattoo machine, and see the full PMU starter list.

The bottom line

Start with a hand tool, a small selection of sterile blades in two shapes and two or three pin counts, one brow pigment set with a modifier, mapping tools, practice sheets and sharps disposal. The microblading collection and PMU pigments at Miami Tattoo Supplies carry each item on this list.

Watch

Microblading Procedure Prep and Pre Draw | Tina Davies · Tina Davies Professional on YouTube

Gear mentioned

Products from the Miami Tattoo Supplies catalog, the publisher of this site. Check current price and stock on the store.

Frequently asked questions

What is the difference between a U blade and an angled microblade?

A U blade has its pins arranged in a U-shaped curve; Tina Davies says its U blade is designed to help artists create natural curves with minimal effort. An angled blade sets its pins on a slant. Start with the shapes your trainer used, and practice each on brow sheets before using it on clients.

What blade size should a beginner buy?

Start with the middle sizes of 12 and 14 pins, plus a small 7 or 9 pin blade for short hairs. Buy from a single maker so the codes and diameters are consistent, and practice every size on brow practice sheets before using it on a client.

Can microblading blades be reused?

No. Microblades are sold sterile for single use and must go into a sharps container after the procedure. Tina Davies, for example, labels its blades single-use and EO gas sterilized. A reusable handle can be cleaned between clients, but the blade itself is never reused.

Do I need a license to microblade in Florida?

Yes. The Florida Department of Health classifies microblading, permanent cosmetics and micro-needling with pigment as tattooing. You need a tattoo artist license, which requires being 18 or older and completing a department-approved bloodborne pathogens course, and you must work in a licensed tattoo establishment with a biomedical waste generator permit.

How much do microblading supplies cost to start?

At Miami Tattoo Supplies at the time of writing (November 2026), a hand tool is $8.50, a brow pigment set $109 to $267, mapping tools about $30, practice sheets $2.99 each and hygiene basics about $45 to $60. Supplies for a starter setup land at roughly $200 to $400, before training fees.

Sources

  1. Florida Department of Health — Microblading, Permanent Cosmetics, and Micro-needling Using Pigments, Dye, or Ink
  2. Tina Davies Professional — 14 U Needle Microblade
  3. Perma Blend — Frequently asked questions
  4. FDA — Tattoos & Permanent Makeup: Fact Sheet