Ink Caps: Sizes, Types and How Many You Need

Short answer
What size ink caps should I use?
Use small #9 caps for small amounts of color and touch-ups, medium #14 for most single colors, and large #16 for black, grey wash and big color fills; #20 and #25 caps suit large magnum work. Set them in a holder or on a flat base so they cannot tip. Every cap is single-use: ink goes into a clean cap for each client and leftover ink is thrown away.
Key takeaways
- Size numbers run small to large: #9, #11, #14, #16, #20, #25. Bigger caps hold more ink and fit larger needle groupings.
- Pick by the amount of ink and the width of the needle grouping you dip, not by habit.
- Flat-bottom caps stand on their own; standard caps need a holder, a base or a dab of glide to stay upright.
- Florida requires ink to be dispensed into clean single-use cups for each client, and unused ink to be discarded.
- Plain plastic caps cost a few cents each in bags of 200 to 1,000; novelty shapes cost more and do the same job.
On this page 6 sections
Ink caps are the cheapest item on the tray and one of the easiest to get wrong: too small and a magnum will not fit or the cap runs dry mid-pass; too big and you pour ink you will throw away. This guide is published by Miami Tattoo Supplies, and every product and price is from the ink caps and accessories collection at Miami Tattoo Supplies at the time of writing (November 2026).
What size ink caps should I use?
Match the cap to how much ink the area needs and how wide the needle grouping is. Size numbers go up as the cap gets bigger.
| Size | Typical use | Store example (Nov 2026) |
|---|---|---|
| #9 small | A few drops of a color, small details, touch-ups | 200 for $6.50, 1,000 for $15.50 |
| #11 small/medium | Small color areas | Flat-bottom, 200 for $6.50 |
| #14 medium | Most single colors, lining black on small pieces | 200 for $6.50, 1,000 for $16.50 |
| #16 large | Black for lining and shading, grey wash, larger fills | 200 for $6.50, 1,000 for $18 |
| #20 extra-large | Large magnums, big black or grey areas | Flat-bottom, 500 for $21.90 |
| #25 extra-extra-large | Very large fills with wide magnums | Flat-bottom, 250 for $15.90 |
As a rule of thumb, set out a #16 for your main black or your grey wash on anything bigger than palm size, #14 for each color that covers a real area, and #9 for accents. If you work with large magnums, move up to #20 or a wide silicone cap so the full needle width goes into the ink without touching the rim. Grouping widths are covered in magnum tattoo needles explained, and how much ink a piece uses in how much tattoo ink you need.
Are ink caps single-use?
Yes. Florida's tattoo rule requires individual portions of ink to be dispensed into clean single-use cups for each customer, and any unused ink to be discarded after the tattoo. Never pour leftover ink back into the bottle, and never carry a cap over to the next client. Other states word it differently but reach the same result; check yours.
That is also why pouring the right amount matters. Ink left in a cap at the end is waste, so start small and top up from the bottle, with a fresh glove or a barrier-covered bottle, rather than filling every cap to the brim.
Plastic vs silicone ink caps
Plastic (polypropylene) caps are the standard: cheap, light, sold in bags of 100 to 1,000. They come with a narrow base that needs a holder, or with a flat bottom that stands on its own.
Silicone caps are made from soft medical-grade silicone; ELITE lists its caps as reinforced to resist cracking. ELITE's round silicone caps are listed in #13, #15 and #18 at $13 per pack, and the ELITE XXL rectangle caps, made for large magnums, at $15 for 50. If a silicone cap is marketed as reusable, treat it as single-use anyway in a state like Florida that requires clean single-use cups for each client.
Novelty shapes such as heart, skull and doll-head caps hold ink exactly like standard caps; they cost a little more ($6.50 to $7.50 per bag of 50 to 100).
Bases, holders and keeping caps upright
A tipped cap means wasted ink and a contaminated tray. Options:
- Flat-bottom caps, which stand on their own. The store lists them from #11 to #25.
- Cap holders. A black plastic holder with slots for four cups and four caps, compatible with #9 and #16, is listed at $3.99; a stainless steel holder for #9, #14 and #16 at $5. Reusable holders need to be cleaned and disinfected after each client.
- A dab of glide or ointment on the tray liner under each cap, which many artists use to anchor standard caps. Use a single-client portion, dispensed with a clean tongue depressor.
For layout around the chair, see how to set up a tattoo station.
How many ink caps do you need?
Per session, one cap per ink you will use, plus one for rinse water if you rinse in caps rather than a rinse cup, plus spares for diluted shades and mixed colors (how to mix tattoo ink colors covers mixing in the cap). A black-and-grey piece with three grey wash dilutions and a black needs four or five caps; a color piece with eight colors needs eight to ten.
For stock, count your weekly sessions and average caps per session, then buy the bag that covers a month. At these prices, bags of 1,000 in your two most-used sizes are the cheapest way to never run out; the #16 large caps are $18 per 1,000.
Ink caps also appear on the tattoo apprentice supply list and the studio hygiene supplies list.
Gear mentioned
Products from the Miami Tattoo Supplies catalog, the publisher of this site. Check current price and stock on the store.

Ink Caps (#14) Medium For Tattoo Ink-Cups
View at Miami Tattoo Supplies: Ink Caps (#14) Medium For Tattoo Ink-Cups
Ink Caps (#9) Small For Tattoo Ink-Cups
View at Miami Tattoo Supplies: Ink Caps (#9) Small For Tattoo Ink-Cups
Ink Caps (#16) Large For Tattoo Ink-Cups
View at Miami Tattoo Supplies: Ink Caps (#16) Large For Tattoo Ink-Cups
Ink Cups Flat Bottom For Tattoo ink - Large, X-Large & XX-Large
View at Miami Tattoo Supplies: Ink Cups Flat Bottom For Tattoo ink - Large, X-Large & XX-Large
Technical
Tattoo Ink Large Cap Holder in Stainless Steel
View at Miami Tattoo Supplies: Tattoo Ink Large Cap Holder in Stainless Steel
Elite
ELITE Silicone Ink Caps XXL - Rectangle Shape
View at Miami Tattoo Supplies: ELITE Silicone Ink Caps XXL - Rectangle Shape
Frequently asked questions
What does the number on an ink cap mean?
It is a size code. Higher numbers mean larger caps: #9 is small, #14 medium, #16 large, and #20 and #25 are extra-large sizes. Exact dimensions vary slightly by maker, so if you use a holder, check that the holder lists the cap sizes you buy.
What size ink cap is best for black?
Most artists use a #16 large cap for lining and shading black, because it holds enough for a medium piece and fits most grouping widths. For small pieces a #14 is enough. For large blackwork with wide magnums, move to #20 or a wide silicone cap.
Can I reuse ink caps for the same client in a later session?
No. Ink is dispensed into clean single-use cups for each session and any leftover is discarded when the tattoo is finished. Florida's rule requires discarding unused ink at the end of each procedure, and storing a used cap of ink between sessions is not a safe practice anywhere.
Do I need a holder if I use flat-bottom caps?
Not to keep them upright, since flat-bottom caps stand on their own. A holder still helps keep colors in order and stops caps being knocked over when you reach across the tray.
Are silicone ink caps worth it?
They are worth it if caps tipping over is a recurring problem or you need extra-wide caps for large magnums. For everyday color and black work, standard plastic caps do the same job for a fraction of the cost.